Changing the Schedule
To change the schedule for a task, follow the procedure given in
Scheduling a Task (beginning on page 9-7), entering the information
for the new schedule. The new schedule automatically replaces the
old schedule for that task.
Deleting a Scheduled Task
You can delete a scheduled task by following these steps:
1
If the system has only one array, skip to step 2. Otherwise,
from the System Menu select the array for which you want to
schedule a task. The Main Menu for that array appears.
2
From the Main Menu, select Scheduler Functions. The Sched-
uler Menu appears.
3
Select Unschedule Verify, Unschedule Reconstruct, or
UnSchedule Spare Testing.
Using the Hardware Functions
The Hardware Functions option provides tools for
Identifying the array that uses a specific drive
Identifying the location of a selected drive by blinking the light
on the front panel of the drive
Suspending host adapter activity while you replace drives in
an array
Identifying the Allocation of Host Adapter Drives
You can quickly identify where each host adapter drive is used by
selecting the Display Host Adapter Drives option. This option lets
you display for every drive the following information:
The array that contains the drive
The ordinal number of the drive in the array
To display the information, follow these steps:
1
If the system has only one array, skip to step 2. Otherwise,
from the System Menu select any array. The Main Menu
appears.
AHA-3980/3980W/3985/3985W User's Guide
Stock Number: 510810-00, Rev. D
Print Spec Number: 493479-00
Current Date: 3/1/99
Managing Arrays
9-9
Page: 9-9
ECN Date: 3/19/96