Starting The Administrator Utility; Exiting The Administrator Utility - Adaptec AHA-3980 User Manual

AHA-3980/3980W/3985/3985W User's Guide

Starting the Administrator Utility

To start the Administrator utility, follow these steps:
1
If the server is not running, start it.
2
At the server prompt, enter one of the following commands:
a
Enter load c:aruadmin if this is the first time you have run
the Administrator Utility.
If no previously defined arrays are detected, the utility
starts in setup mode. If one or more arrays have already
been defined and if arumon is not in autoexec.ncf , arumon
is added to the autoexec.ncf file and the utility suite is
automatically copied over from the server.exe directory.
b
Enter load aruadmin if this is not the first time you have run
the Administrator Utility.

Exiting the Administrator Utility

To exit the Administrator utility, follow these steps:
1
Press Esc until the following prompt appears:
Do you want to exit the Administrator? (y|n)
2
Type y. You return to the server prompt.
7-2
AHA-3980/3980W/3985/3985W User's Guide
Stock Number: 510810-00, Rev. D
Print Spec Number: 493479-00
Current Date: 3/1/99
Page: 7-2
ECN Date: 3/19/96