Adaptec AHA-1740A Instructions For Installing
Installing the bios and firmware eproms
Hide thumbs
Also See for AHA-1740A:
- User manual (68 pages) ,
- Technical reference manual (191 pages) ,
- Installation manual (38 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
AHA-1740A/1742A
Installing the BIOS and Firmware
EPROMs
Proceed with the following steps to install your new
BIOS and firmware EPROMs.
Turn off power to the system and all external de-
vices. Serious damage to your system unit and
options can occur if you leave the power on.
Adaptec recommends that you unplug your system
from the AC outlet.
1.
Remove the cover of your EISA personal computer
to expose the expansion slot containing your
AHA-1740A/1742A adapter.
The AHA-1740A or AHA-1742A, like all electronic
equipment, is static sensitive. Discharge the static
electricity from your body by touching an un-
painted metal surface of your computer frame or
rear panel before handling the board.
2.
Remove all cables from the host adapter.
Instructions
for
Installing
EPROMs
CAUTION
CAUTION
adaptec
Advertisement
Table of Contents
Related Manuals for Adaptec AHA-1740A
Summary of Contents for Adaptec AHA-1740A
- Page 1 Remove the cover of your EISA personal computer to expose the expansion slot containing your AHA-1740A/1742A adapter. The AHA-1740A or AHA-1742A, like all electronic equipment, is static sensitive. Discharge the static electricity from your body by touching an un- painted metal surface of your computer frame or rear panel before handling the board.
- Page 2 Plug in all previously removed cables. Replace the system cover to prevent personal injury before applying power to the system. adaptec 691 south milpitas blvd. milpitas, california 95035 CAUTION Stock No.: 510376-00 Rev A GM 1/93 Printed in Singapore...
Need help?
Do you have a question about the AHA-1740A and is the answer not in the manual?
Questions and answers