Jumper Block Locations; Aha-1520A/1522A Jumper Blocks; Aha-1510A Jumper Block - Adaptec AHA-1510A Series User Manual

AHA-1510A/20A Series User's Guide

Jumper Block Locations

AHA-1520A host adapters have four jumper blocks, labeled J5, J6, J8
and J9. (These labels are printed on the board next to the jumper
blocks.) AHA-1522A host adapters have an additional jumper block,
J7, to enable or disable the floppy controller. Figure 2-1 shows the
location of these jumper blocks.
AHA-1522A
only
Floppy connector
J5
Floppy
controller
J7
J8 J9
Figure 2-1. AHA-1520A/1522A Jumper Blocks
The AHA-1510A host adapter has only one jumper block, J9, which
is described on page 2-8. Figure 2-2 shows its location.
J9
Figure 2-2. AHA-1510A Jumper Block
2-2
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A
A A
AHA-1510A/20A Series User's Guide
A
A A
Stock Number: 510400-00, Rev. C
A A
A A Print Spec Number: 491842-00
A A
Current Date: 11/18/94
AAAA AAAA A AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA
Internal SCSI connector
J6
Terminators
Host adapter
AIC-6360
BIOS
External SCSI
connector
Internal SCSI connector
Terminators
AIC-6360
External SCSI
connector
ECN Date: 11/29/94
AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
A
A A
A A
Page: 2-2 A A
A
A A
A A
AAAA AAAA AAAA A A A A