Sata Configuration Options; Scsi Configuration Options - Adaptec 2025ZCR Installation And User Manual

SATA Configuration Options

The SATA Configuration options are described in the table below.
Option Default
Write Cache Yes

SCSI Configuration Options

To access the SCSI Device Configuration options, select SCSI
Configuration.
SCSI Channel Interface Definitions
The SCSI Channel Interface Definitions are described in the table
below.
Option
Controller SCSI
Channel ID
SCSI Parity
Checking
Controller SCSI
Channel
Termination
Models
Affected
All SATA
controllers
Default Description
7 Sets the controller's SCSI ID. Adaptec
recommends that you leave the controller set
to the default, which gives it the highest
priority on the SCSI channel.
Enabled Determines whether the controller verifies
the accuracy of data transfer on the SCSI
channel. You should disable SCSI Parity
Checking on the controller and all SCSI
devices if any SCSI device supported by the
controller does not support SCSI parity;
otherwise, retain the default. Most SCSI
devices do support SCSI parity. If you are not
sure whether a device supports SCSI parity,
consult the documentation for the device.
Auto Sets termination on the controller. Adaptec
Mode recommends that you retain the default
setting.
Adaptec RAID Configuration Utility (ARC)
Description
When Enabled, write cache is enabled,
providing maximum performance.
Caution—When Enabled, there is a
potential for data loss or corruption
during a power failure.
A-12