Starting Adaptec Storage Manager; Windows Operating Systems - Adaptec 2025ZCR Installation And User Manual

3 From the command prompt, type:
xx_yy_zz:\netware\manager\install
where is the product CD,
xx
the release number. For example:
adptcd_v2_01
The installation program starts.
4 Follow the instructions on the screen to complete the
installation.

Starting Adaptec Storage Manager

Note: You need root privileges to run Adaptec Storage
Manager.
To start Adaptec Storage Manager, use the following procedures
for your operating system.

Windows Operating Systems

1 To run Adaptec Storage Manager as a standalone application,
click Start > Programs > Adaptec Storage Manager. To run
Adaptec Storage Manager in a browser, open the browser, then
type in the IP address, colon (:), and 34572 as the port number.
2 First the application flash screen will appear briefly , and then
the Adaptec Storage Manager window will open with a log in
dialog box superimposed. Enter a valid user name and
password for a user on the system, and click Connect.
Installing and Starting Adaptec Storage Manager
is the version number, and
yy
is
zz
4-7