Adaptec 2025ZCR Installation And User Manual page 129

container set cache [/read_cache_enable={boolean}]
[/unprotected={boolean}] [/write_cache_enable={boolean}]
{container}
Sets cache parameters for a specific array. Useful only if a native
OS's file system resides on the array.
Parameters
{container}—ID number of the array on which to set cache
parameters.
Switches
/read_cache_enable—Specifies whether to enable the read-
ahead cache.
/unprotected—Specifies whether to set the container's NVRAM
write-back cache to disable, enable when protected, or enable always.
Use this switch in conjunction with the /write_cache_enable
switch.
/write_cache_enable—Specifies whether to set the container's
NVRAM write-back cache to disable, enable when protected, or
enable always. Use this switch in conjunction with the
/unprotected switch.
container set failover {container} {device_ID}
[{device_ID}...]
Assigns an automatic failover disk for a single array.
Parameters
{container}—ID number of the array on which to assign an
automatic failover disks.
{device_ID}—ID for the device to assign as a failover disk.
container set global_failover {device_ID} [{device_ID}...]
Assigns an automatic failover disk for all arrays.
Parameters
{device_ID}—ID for the device to assign as a failover disk.
container set io_delay {container} {integer}
Sets the I/O delay (in milliseconds).
Command Line Interface
D-24