Adaptec 2025ZCR Installation And User Manual page 36

3 Insert the Adaptec installation CD.
Note: If the installation CD does not start automatically,
you may need to enter system Setup and enable booting
from the CD. For details, refer to your computer's
documentation.
Select the appropriate language on the Language screen, then
4
press Enter. Read the information on the Licenses screen, then
press Enter again.
The Adaptec installation CD main menu is displayed.
Select Launch Configuration Utility.
5
The system launches Adaptec Storage Manager. The Adaptec
Storage Manager screen appears.
6 Click Create.
7 In the configuration wizard, select Custom.
Click the RAID 5 button, then click Next.
8
9 Click at least three drives to be used in your array.
Each drive you select is marked with a check.
10 Click Next.
11 Type the name you want to assign to the RAID 5 you are
creating, then click Apply.
The system creates the array. The display refreshes to show the
newly-created RAID 5 on the right side of the display. You may
use the array immediately. However, if you want to make the
array bootable you must allow the array to finish building
before restarting the system.
Installing the Controller and Drives
2-8