Adaptec 2025ZCR Installation And User Manual page 91

Type Keyword
Type is a required keyword, indicating the array type. There is no
default value. The Type keyword values are:
Volume
RAID0
RAID1
Note: For information about which array types your controller
supports, see
Wait Keyword
Wait is an optional keyword that you can use to tell the ACU to
allow the ACU to continue while the build/verify or clear
completes in the background; specify wait=no. Otherwise, the
ACU waits by default.
Note: If the host is powered off before the build/verify or clear
process completes and is then restarted, the process resumes
without any user intervention.
Examples
Wait=Yes
Wait=No
WriteCache Keyword
The WriteCache keyword indicates whether write caching is used
for this array if write caching is supported for the system. Possible
values are as follows:
Yes (the default)—Enable the write cache.
No—Disable the write cache.
Note: Setting an array's WriteCache keyword to Yes might
result in data loss or corruption during a power failure.
Example
WriteCache=Yes
RAID5
RAID10
RAID50
Controller Features on page
ACU for DOS
1-5.
B-11