Controller Configuration; Sata Configuration - Adaptec 1420SA Installation And User Manual

Controller Configuration

To access Controller Configuration:
From the SATASelect menu, select Controller Configuration.
You can modify the following Controller Interface options:
Runtime BIOS—Enables or disables the controller's runtime
BIOS. The BIOS must be enabled if you want to boot from the
controller.
If Runtime BIOS is enabled and the Array-based BBS Support
option is disabled, the controller BIOS is enabled and will post
the first array (or drive) attached to the controller as a bootable
hard disk drive.
The default is Enabled.
Array-Based BBS Support—If Runtime BIOS, and this option
are enabled, all devices (array or drives) on each controller in
the system are posted as BBS devices.
In a BBS-enabled system, if array-based BBS support is enabled,
the Hard Drive Boot order menu includes entries for all arrays
(or drives) connected to the installed RAID controllers.
The default is Enabled.
Physical Drives Display during POST— The default is
Disabled.

SATA Configuration

To access SATA Configuration:
From the SATASelect menu, select SATA Configuration.
The SATA Device Configuration menu is displayed. Select the
appropriate channel from this menu.
Adaptec RAID Configuration Utility
6-10