System Requirements - Magna Telemotive blue PiraT2 User Manual

blue PiraT2 / 5E / Mini
Datum: 16.09.2016
Seite 8 von 77
Camera User Guide
4

System requirements

Control Unit
A Windows based Laptop or PC is needed to configure the devices of Telemotive AG by
Telemotive System Client. It also allows to save the recorded data and to use them offline
later.
Telemotive System Client
The software client is used for configuring the data logger as well as downloading the recorded
data or convert these into your needed file format. An firmware update can be performed by the
Telemotive System Client too to ensure that your devices are always up to date.
blue PiraT2 / blue PiraT2 5E / blue PiraT Mini
The communication between bus systems and control units is monitored and relevant data can
be recorded very precisely with the data logger of Telemotive AG. The collected data are stored
to the logger and can be downloaded via Ethernet to a PC.
The blue PiraT2 is our top-class all-in-one data logger. Seven models cover a wide range of
interfaces.
Additionally, the blue PiraT2 5E offers improved power management and power backup, five
integrated Ethernet ports and super-fast start-up behavior. The blue PiraT2 can be flexibly ex-
panded via Telemotive System Link.
The blue PiraT Mini is smallest data logger in the world with an outstanding functional scope. It
offers a wide range of interfaces, stable temperature behavior, very low energy consumption,
four GBit Ethernet ports, and much more. Different blue PiraT Mini can be flexibly expanded to
one cluster and therefore handled very easily by using Telemotive System Link.
Remote Control Touch (optional)
Operate your blue PiraT Mini or blue PiraT2 data loggers safely and comfortably from the driv-
er's or passenger seat. Via Telemotive System Link our new remote control becomes part of
your logger network. One remote control can handle all connected loggers.
blue PiraT Remote
While Remote Control Touch is just a control unit for handling unique devices or a TSL network,
the blue PiraT Remote additional has logger functionality by offering internal storage and some
interfaces.
blue PiraT2 Ethernet kit
This optional enhancement Ethernet kit is connected via a FCI cable to the rear side of the blue
PiraT2. With his four Ethernet interfaces it establishes the connection between data logger and
the Video Encoder or one single camera and allows connecting to a Local Area Network (LAN).
In this way the Ethernet port on the front side of the data logger is open. This allows using the
front Ethernet port for communication with the Telemotive System Client and manages the log-
ger.
The Ethernet kit is available for blue PiraT2 only, because blue PiraT2 5E has an integrated
Ethernet switch and four ports at the rear side.
Network camera AXIS P12 / F44 / F41 / 211 / 210 / 207
Network cameras have an Ethernet port and therefore can be connected directly to the data
logger. Up to four cameras are supported to record the video streams. These cameras can be
connected to the four channels of the encoder. The following AXIS camera types are supported:
P12, F44, F41, 211, 210 and 207.
bP2-Mini_Camera_UserGuide_V2.4.1.doc