Table of Contents
Advertisement
7
Configuring the network camera AXIS 207/210/211
Warning:
The camera must have installed the firmware version 4.40. If there is another firmware
version installed it is recommended to install the 4.40.
Any camera that is used with the data loggers blue PiraT2 / blue PiraT2 5E / blue PiraT Mini can
be installed manually or automatically (recommended).
The manual configuration is done over the camera web interface.
The automatic configuration is done with the program "AXIS Camera Management". For this
variant a template is available.
7.1
Related manuals
AXIS 207 User Manual [1]
AXIS 210 User Manual [2]
AXIS 211 User Manual [3]
7.2
Automatic configuration (recommended)
Needed software: AXIS Camera Management v2.00.31
http://www.axis.com/techsup/software/index.htm
http://www.axis.com/de/products/cam_mgmt_software/interface.htm
Configuration steps:
1. Check firmware version. Recommended: 4.40 (more information see [1], [2], [3] or AXIS
online).
2. Resetting camera to the factory default settings (more information see [1], [2] or [3]
chapter "Resetting to the Factory Default Settings").
3. Connect the camera with the PC / laptop via an Ethernet cable.
4. Set the password (more information see [1], [2] or [3] chapter "Set the password").
5. Install camera template by using the program "AXIS Camera Management".
6. Add administrator.
bP2-Mini_Camera_UserGuide_V2.4.1.doc
blue PiraT2 / 5E / Mini
Camera User Guide
or
Datum: 16.09.2016
Seite 31 von 77
Index
Advertisement
Table of Contents
