Save And Restore The Video Encoder Settings - Magna Telemotive blue PiraT2 User Manual

blue PiraT2 / 5E / Mini
Datum: 16.09.2016
Seite 58 von 77
Camera User Guide
10

Save and restore the Video Encoder settings

To save all settings of the AXIS video server you can use the program "AXIS Camera Manage-
ment", which can be downloaded on the website of AXIS (registration required).
Needed software: AXIS Camera Management v2.00.31
http://www.axis.com/techsup/software/index.htm or
http://www.axis.com/de/products/cam_mgmt_software/interface.htm
Attention:
If you use a newer version of the program it may be that the communication between
software client and data logger is disturbed. That is because the program changes some
network settings, so UDP pings are not correctly transferred from the logger to the AXIS
Camera Management Client.
In this case the older version (mentioned above) should be used or the program should
be uninstalled after the saving.
After installing the software you can start it by using [Start]  [AXIS Camera Management] 
[AXIS Camera Management Client].
Figure 10.1: AXIS Camera Management Client
You can add your device by clicking [Add devices].
Figure 10.2: Adding devices step 1
bP2-Mini_Camera_UserGuide_V2.4.1.doc