Start Creation Process
After you have made your selections, select this option and press
Enter to start the creation process.
Note: If you skip the Select Disk Drive option before selecting
the Start Creation process, you will get an error message at
the end of the creation process.
Start Creation With RAID 1
When you select the Start Creation option under RAID 1, you will
get a Process option sub-menu displaying the following options
(see
Figure
3-4):
Create only
Create and duplicate
Figure 3-4 RAID 1 Options
Create only
This option allows you to create the array. When you select this
option, you will get a warning that all the data on the selected disks
will be deleted. Press Y to continue.
Using the BIOS Array Configuration Utility
3-5