Create Arrays - Adaptec 1200A Installation And User Manual

Viewing Hard Disk Drives
From the Controller tab, select a Channel, then select a hard disk
drive. The right pane displays the Device Information you have
selected (see Figure
Figure 5-8 Device Information

Create Arrays

To create a RAID array, go to the Main menu and from the toolbar,
select a RAID array.
The Adaptec ATA RAID Management Software supports the
following RAID levels:
RAID 0—Striping mode for boosting performance.
RAID 1—Mirroring mode for data security.
RAID 0/1—Mirrored Striping.
JBOD—High capacity without redundancy or high-
performance features.
For more information on supported RAID levels, see
RAID on page 1-5.
Using the Adaptec ATA RAID Management Software
5-8).
Defining
5-7