Using The Bios Array Configuration Utility; Introduction - Adaptec 1200A Installation And User Manual

Using the BIOS Array
Configuration Utility
In this Chapter

Introduction

Create Array
Delete Array
Create/Delete Spare
Select Boot Disk
Introduction
The Adaptec ATA RAID 1200A card has an on-board BIOS Array
Configuration Utility which allows you to create a bootable array
on your hard disk drives.
Before you can use your BIOS Array Configuration Utility, make
sure you have done the following:
1 Installed the Adaptec ATA RAID 1200A card into a valid PCI
slot.
2 Attached the hard disk drives.
3 Reinstalled the computer cover and connected all power cables.
4 Powered-on your system.
3
3-1
3-2
3-6
3-6
3-7
3-1