Table of Contents
Advertisement
Chapter 2 Adjusting the Screen
2-1. Compatible Resolutions
For information about the compatible resolutions of the monitor, see "Compatible Resolutions" in the
Instructions for Use.
2-2. Setting the Input Signal
You can select an input signal to be displayed on the screen.
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "Input", then
3. Select "DisplayPort" or "DVI", then select
Attention
• If you turn the main power off and on again, the input signal is automatically detected regardless of the setting.
• If the PC that outputs the specified signal enters the power saving mode or is turned off when "Auto Input
Detection" is set to "On", any other available signal is displayed automatically. For details, refer to
Automatically Detecting the Input Signal" (page
Note
• When the setting is complete, the input port names appear.
8
Chapter 2 Adjusting the Screen
.
.
19).
.
"5-2.
Advertisement
Table of Contents
