Table of Contents
Advertisement
●
Adjusting the color temperature
Adjust the color temperature.
The color temperature is normally used to express the hue of "White" and / or "Black" with a
numerical value. The value is expressed in degrees "K" (Kelvin).
The screen becomes reddish at low color temperatures and bluish at high color temperatures, similar
to the temperatures of a flame. The gain preset values are set for each color temperature setting
value.
Setting Range
Native, 6000 K to 15000 K (in increments of 100 K), sRGB
Procedure
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Temperature" then
3. Specify the setting using
4. Select
after completing the setting.
Note
• "Gain" allows you to perform more advanced adjustment (see
• If set to "Native", the image is displayed in the preset color of the monitor (Gain: 100 % for each RGB
channel).
• When gain is changed, the color temperature is changed to "User".
●
Adjusting the gamma
Adjust the gamma. While the brightness of the monitor varies depending on the input signal, the
variation rate is not proportional to the input signal. Maintaining the balance between the input signal
and brightness of the monitor is referred to as "Gamma correction".
Setting Range
1.6 to 2.7, sRGB
Procedure
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Gamma", then
3. Specify the setting using
4. Select
after completing the setting.
Attention
• When "Hybrid Gamma PXL" is set to "On", the gamma value for pixels that display a color image is fixed to a
value appropriate for color image display (Fixed) regardless of the setting.
12
Chapter 2 Adjusting the Screen
.
or
.
.
or
.
.
"Adjusting the gain" (page
.
14)).
Advertisement
Table of Contents
