Eizo FLEXSCAN MX240W User Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. FLEXSCAN MX240W
  6. User manual
Eizo FLEXSCAN MX240W User Manual

Eizo FLEXSCAN MX240W User Manual

Color lcd monitor
Hide thumbs Also See for FLEXSCAN MX240W:
Table of Contents

Advertisement

Quick Links

Please read this User's Manual carefully to
familiarize yourself with safe and effective

usage procedures.

Please retain this manual for future
reference.
SAFETY SYMBOLS ........................................................ 2
PRECAUTIONS .......................................................... 3
1. Introduction .................................................................. 7
1-1. Features .................................................................. 7
1-2. Buttons and Indicators ............................................ 8
1-3. Utility Disk ............................................................... 9
2. Installation .................................................................. 10
2-1. Connecting Two PCs to the Monitor ...................... 10
3. Screen Adjustment and Settings ............................... 12
3-1. Basic Operation and Functions ............................. 12
3-2. Screen Adjustment ................................................ 14
3-3. Color Adjustment ................................................... 17
3-4. Power-save Setup ................................................. 20
3-5. Off Timer ............................................................... 21
3-6. Locking the settings............................................... 21
3-7. Power Indicator Setting ......................................... 22
3-8. Automatic brightness adjustment .......................... 22
3-9. Displaying Lower Resolutions ............................... 23
3-11. EIZO Logo Appearing Function ........................... 24
4.Troubleshooting .......................................................... 25
5. Reference .................................................................. 28
5-1. Attaching an arm ................................................... 28
5-2. Cleaning ................................................................ 29
5-3. Specifications ........................................................ 30
5-4. Glossary ................................................................ 33
6. APPENDIX/ANHANG/ANNEXE ................................ 35
About TCO'03 ................................................................37
FCC Declaration of Conformity ......................................38
Hinweise zur Auswahl des richtigen
Schwenkarms für Ihren Monitor /
Hinweis zur Ergonomie ..................................................39

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FLEXSCAN MX240W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Eizo FLEXSCAN MX240W

Summary of Contents for Eizo FLEXSCAN MX240W

  • Page 1: Table Of Contents

    3-8. Automatic brightness adjustment ... 22 3-9. Displaying Lower Resolutions ... 23 3-10. Setting the orientation of the Adjustment menu ... 24 3-11. EIZO Logo Appearing Function ... 24 4.Troubleshooting ... 25 5. Reference ... 28 5-1. Attaching an arm ... 28 5-2.

  • Page 2: Safety Symbols

    Indicates a prohibited action. Indicates to ground for safety. Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

  • Page 3: Important

    PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. This product is designed for use in Japan only and cannot be used in any other countries.
  • Page 4 WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit.
  • Page 5 WARNING When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit.

  • Page 6: To Use The Monitor Comfortably

    LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor.

  • Page 7: Introduction

    EIZO LCD Utility Disk). • The utility software "ScreenManager Pro for Medical" (for Windows) to control the monitor from a PC with mouse/keyboard is included (refer to the EIZO LCD Utility Disk). • Smoothing function incorporated for the adjustment of an enlarged image •...

  • Page 8: Buttons And Indicators

    6. Enter button 7. Control buttons (Left, Down, Up, Right) 8. Power button 9. Power indicator Indicator status Blue Orange *ScreenManager is an EIZO's nickname of the Adjustment menu. ® � � � � � Operation status The screen is displayed...

  • Page 9: Disk Contents And Software Overview

    1-. Utility Disk An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual.

  • Page 10: Selecting Input Signal

    . Installation -1. Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor. Connection examples PC 1 (Ex.1) Digital D-Sub (Ex.2) Analog mini 15 Selecting input signal Switch the input signal with switched, the active signal type (Signal 1 or 2/ Analog or Digital) appears at the top right corner of the screen for two seconds.

  • Page 11: Making Use Of Usb (Universal Serial Bus)

    -. Making Use of USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected.

  • Page 12: Screen Adjustment And Settings

    . Screen Adjustment and Settings -1. Basic Operation and Functions Adjustment menu allows you to adjust screen performance though the main menu and select a CAL Switch mode easily. CAL Switch Menu NOTE •The Adjustment menu and the CAL Switch mode name cannot be displayed at the same time. Entering the Adjustment menu Press once to display the main menu of the Adjustment menu.
  • Page 13 Functions The following table shows all the Adjustmet menu's adjustment and setting menus. "*" indicates adjustments of analog input only and "**" indicates digital input only. Main menu Sub menu Screen Clock Phase Position Resolution Range Adjustment Smoothing Signal Filter Brightness Color(Custom) Temperature...

  • Page 14: Screen Adjustment

    If the appropriate screen can be made, proceed to 4. Range Adjustment . Run the "Screen Adjustment Program". Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu screen of the CD-ROM.)
  • Page 15 Adjust by using <Screen> menu in the Adjustment menu. (1)Vertical bars appear on the screen Use the <Clock> adjustment. Select the <Clock> and eliminate the vertical bars by using Do not continuously press the Control buttons, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur or bars appear, proceed to <Phase>...
  • Page 16 (4)Screen image is smaller or larger than the actual screen images. Use the <Resolution> adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select <Resolution> and confirm if the resolution now being displayed is the same as the input resolution.

  • Page 17: Color Adjustment

    -. Color Adjustment Simple adjustment [CAL Switch mode] This function allows you to select the best display mode for monitor brightness, etc. To select CAL Switch mode Directly pressing allows you to select the best suited mode for screen display from 4 CAL Switch modes;...

  • Page 18: Advanced Adjustments[Adjustment Menu]

    Advanced Adjustments[Adjustment menu] Color settings of each CAL Switch mode can be adjusted and saved by using the <Color> menu of the Adjustment menu. In the analog input, perform the "Range Adjustment" before making the color adjustments. Never change the CAL Switch mode during color adjustment.
  • Page 19 Adjustment Contents Menu Function Descriptions Brightness To set the brightness of the screen Tips • The values shown in the “%” are available only as reference. Temperature To set the color temperature Tips • The values shown in the Kelvin are available only as a reference tool. •...

  • Page 20: Power-Save Setup

    -. Power-save Setup The <PowerManager> menu in the Adjustment menu enables to set the power-save setup. NOTE • Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. •...

  • Page 21: Off Timer

    -. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use. [Procedure] 1.

  • Page 22: Power Indicator Setting

    -. Power Indicator Setting Light off the power indicator. This function is available for the multiple panels settings. [Procedure] 1. Select <Power Indicator> in the Adjustment menu <Others> menu. 2. Select "Disable". -. Automatic brightness adjustment The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably.

  • Page 23: Displaying Lower Resolutions

    -. Displaying Lower Resolutions The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the <Others> menu enables to change the screen size. Enlarge the screen size when displaying a low resolution. Select the <Screen Size>. Select the <Screen Size> in the <Others> menu and select the screen size by using Mode Full Enlarged...

  • Page 24: Setting The Orientation Of The Adjustment Menu

    -11. EIZO Logo Appearing Function When switching on the power button on the front control panel, the EIZO logo is displayed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.) [To undisplay] 1.

  • Page 25: Troubleshooting

    .Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems : See No.1 - No.2 • Imaging problems : See No.3 - No.14 • Other problems : See No.15 - No.18 • USB problems : See No.19 - No.20 Problems 1.
  • Page 26 Problems 3. Display position is incorrect. 4. Screen image displayed is smaller or larger than the actual screen image. 5. Vertical bars appear on the screen or a part of the image is flickering. 6. The characters and images have several vertical bars on their right side.
  • Page 27 • Try executing the following method. •Restarting the PC •Connecting the PC and peripherals directly If the problem is solved by doing this, contact an EIZO dealer. • Check that the USB cable is correctly connected. • Check that the PC and OS are USB compliant. (For verification of USB support, consult the manufacturer of each system.)

  • Page 28: Reference

    . Reference -1. Attaching an arm The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor. NOTE • If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting.

  • Page 29: Cleaning

    -. Cleaning Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent.

  • Page 30: Specifications

    -. Specifications LCD Panel Viewing Angle Dot Pitch Horizontal Scan Analog Frequency Digital Vertical Scan Analog Frequency Digital Resolution Dot Clock Analog (Max.) Digital Display Colors Display Area Power Supply Power Consumption Input Signal Connector Analog Input Signal (Sync) Analog Input Signal (Video) Input Signal (Digital) Signal Analog...

  • Page 31: Default Settings

    Default settings Smoothing CAL Switch Mode PowerManager Screen Size Off Timer Menu Settings Menu Size Menu Off Timer BrightRegulator Language Dimensions 168(6.6) 566(22.3 520.4(20.5) DICOM-CL Analog input : VESA DPMS Digital input:DVI DMPM Full Disable Normal 45 seconds Disable English 287.5(11.3) 85(3.35) 233(9.2)

  • Page 32: Pin Assignment

    Pin Assignment •DVI-I Connector 1 2 3 4 5 6 7 8 C1 C2 10 11 12 13 14 15 16 C3 C4 19 20 21 22 23 24 17 18 Pin No. Signal TMDS Data 2- TMDS Data 2+ TMDS Data2/4 Shield DDC Clock (SCL) DDC Data (SDA)

  • Page 33: Glossary

    -. Glossary Clock With the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system. When the clock pulse is not correctly set, some vertical bars of distortion are displayed on the screen.

  • Page 34: Vesa Dpms

    Resolution The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. This monitor consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200 , all pixels are displayed as a full screen. Temperature Color Temperature is a method to measure the white color tone, generally indicated in degrees Kelvin.

  • Page 35: Appendix/Anhang/Annexe

    . APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique NOTE • Based on the signal diagram shown below factory presets have been registered in the monitor's microprocessor. • Der integrierte Mikroprozessor des Monitors unterstützt werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
  • Page 36 Mode VESA 1600×1200@70Hz VESA 1600×1200@75Hz VESA CVT 1680×1050 60Hz VESA CVT 1920×1200 60Hz VESA CVT RB 1920×1200 60Hz Dot Clock Horizontal 189.0 MHz Vertical Horizontal 202.5 MHz Vertical Horizontal 146.3 MHz Vertical Horizontal 193.3 MHz Vertical Horizontal 154.0 MHz Vertical Frequencies Sync Polarity Horizontal:kHz...

  • Page 37: About Tco'03

    Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.

  • Page 38: Fcc Declaration Of Conformity

    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (Enclosed) This Class B digital apparatus complies with Canadian ICES-003.

  • Page 39: Hinweis Zur Ergonomie

    Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß muß den nachfolgenden Anforderungen entsprechen: a) D er Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der zugehörenden Bedienungsanleitung angegeben. b) D ie Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher als die Augenhöhe eines Benutzers in sitzender Position ist. c) I m Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt. d) D er Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach hinten ≥...
  • Page 40 1st Edition-September, 2007 03V22216A1 (U.M-MX240W)

Table of Contents

Save PDF