●
Enabling or disabling Hybrid Gamma PXL
When the Hybrid Gamma PXL function is enabled, this product automatically differentiates between
monochrome and color parts of the same image at a pixel level, and displays a color image using the
gamma value for color image display.
Setting Range
On, Off
Procedure
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Hybrid Gamma PXL", then
3. Select "On" or "Off", then select
●
Adjusting the contrast
The brightness of the screen is adjusted by varying the video signal level.
Setting Range
0 to 100 %
Procedure
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Contrast", then
3. Specify the setting using
after completing the setting.
4. Select
Note
• When the contrast is set to 100 %, all the color gradations are shown.
• When adjusting the monitor, it is recommended to perform brightness adjustment, which does not lose
gradation characteristics, prior to contrast adjustment.
• Perform contrast adjustment in the following cases.
- If the screen is too bright even when the brightness is set to 0 %
.
.
.
or
.
.
.
Chapter 2 Adjusting the Screen
11