Table of Contents
Advertisement
●
To adjust contrast
The brightness of the screen is adjusted by varying the video signal level.
Adjustable range
0 to 100
Procedure
1. Choose "Color" in the Setting menu, and press
2. Choose "Contrast" in the "Color" menu, and press
The "Contrast" menu appears.
3. Use
or
4. Press
to exit.
Note
• In the contrast of 50, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the
gradation characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
- When you feel the image is too dark even if the brightness is set to 100 (Set the contrast to higher than 50.)
●
To adjust color temperature
Color temperature can be adjusted.
The color temperature is normally used to express the hue of "White" and / or "Black" by a numerical
value. The value is expressed in degrees "K" (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like
the flame temperature. A gain preset value is set for each color temperature setting value.
Adjustable range
Off, 4000 K-10000 K (specified by every 500 K unit, including 9300 K)
Procedure
1. Choose "Color" in the Setting menu, and press
2. Choose "Temperature" in the "Color" menu, and press
The "Temperature" menu appears.
3. Use
or
4. Press
to exit.
Note
• The value shown in "K" is available only as reference.
• "Gain" allows you to perform more advanced adjustment (see
• If you set to "Off", the image is displayed in the preset color of the monitor (Gain: 100 for each RGB).
• When gain is changed, the color temperature is changed to "Off".
16
Chapter 2 Adjusting Screens
for adjustment.
for adjustment.
.
.
.
.
"To adjust gain" (page
19)).
Advertisement
Table of Contents
