Create Your Own Help Files - Agilent Technologies J2126A Quick Reference Manual

4
Using Online Help

Create Your Own Help Files

The help files you create to install on the instrument must be in
HTML format. You can create them using an HTML editor tool,
or with a word processor that will save them as HTML files.
When creating your files for online use follow these simple
guidelines:
• Use only a sans serif type font (such as Arial) of size 12, 14
or 16 point, Normal or Bold - DO NOT use italic as this font
is not supported on the instrument and can cause problems
with the presentation of your document.
• Any images you include should be either GIF or JPEG.
• Write several short documents rather than one long one. A
long document takes longer to open.
• Design a page size and layout that's appropriate for the size
of the instrument display.
• Have all the documents and images in one folder/directory.
The instrument does not currently support file tree struc-
tures.
• Total size of the files should not be more than 1.44Mb.
The instrument supports HTML Standard 3.2 - presentation
CAU T ION CAU T ION
or operation of elements using later HTML standards are
not guaranteed to operate or display on the instrument.
The following procedure was used to create the example help
files that are installed in the instrument - you can view the
results on the online help in the 'Users Own Help Files' sec-
tion.
The example help files can be copied from the instrument and
N O TE
amended for your own use. See "Copy Your Own Help Files to
Disk" on page 53.
1 A standard word processor was used to create the content.
Keeping your document short, two pages or so, will make it
quicker to load and navigate when on the instrument.
2 Save the document as HTML with the file extension html
NOT htm.
50
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Transmission Test Set Quick Reference Guide