Troubleshooting Table; Problems With Operation - Hanseatic HG5544F63602EW User Manual

Page EN-30

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may
■
repair the dishwasher. If in doubt,
contact our service team for this
(see page EN-33).
Only carry out the actions which are
■
described in this user manual.
Never repair defective dishwashers
■
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.

Problems with operation

Problem
The dishwasher cannot be
switched on.
The selected dishwashing
programme will not start or it
stops.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
If water overfl ows, close the water
■
supply immediately and do this be-
fore contacting the service team (see
page EN-33).
If the water has overfl owed, remove
■
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.
Possible cause
The mains plug has not been
inserted into a socket.
There is no voltage being
supplied through the socket.
The dishwasher's door is not
closed properly.
The water tap is not on
properly.
The inlet hose is defective.
There is a risk of overflowing.
The electrical water stop
system has been activated.
Solution
Insert the mains plug into the
socket.
Check the fuse. Check the
socket by connecting anoth-
er device.
Close the dishwasher door.
Turn the water tap on com-
pletely.
Contact our service team
(see page EN-33).