Using Multitabs; Adding Rinse Aid - Hanseatic HG5544F63602EW User Manual

Page EN-14 Dishwasher detergents, rinse aids and dishwasher salts

Using multitabs

Many multitabs already contain dishwash-
er detergent, dishwasher salt and rinse aid,
meaning that you do not need to use these
three products separately. In this case,
you can ignore the 'Add rinse aid'
'Add dishwasher salt'
If your water is in the
– "soft" to "medium" hardness range,
multitabs will deliver good results.
– "hard" range, we would recommend that
you do not use multitabs and instead use
dishwasher detergent, dishwasher salt and
rinse aid individually.
To determine and adjust the water
hardness see page EN-28.
1. Pull back the catch (26) on the detergent
dispenser (21).
The cover will pop open.
2. Place a multitab in the compartment (A)
of the detergent dispenser (21).
3. Push the dispenser cover closed so that
the catch (26) clicks into place once again.
(8)
(7)
(8) and
(7) indicators.

Adding rinse aid

NOTICE
Risk of damage!
Using an excessive amount of rinse aid
can lead to increased foaming and can
compromise the rinsing results.
Wipe away rinse aid which has over-
■
fl owed immediately.
Take note of the markings for the
■
maximum fi ll quantities ("max") in
the rinse aid compartment.
Prior to rinsing, always ensure that
■
the rinse aid compartment is closed.
Using unsuitable substances can cause
damage to the dishwasher.
Only put rinse aids which are suita-
■
ble for dishwashers into the rinse aid
chamber.
You do not need to add rinse aid to the
dishwasher detergent compartment,
– if you are only using multitabs which al-
ready contain rinse aid.
Prior to the first use and when the display no-
tification 'Add rinse aid' lights up, add
rinse aid.
As rinse aid is automatically dispensed during
operation, it ensures that the dishes are spot-
free and accelerates the drying process.
(8)
(8)