Installation, Connection And Initial Commissioning; Choosing A Suitable Location; Positioning; Having The Outlet Hose Connected - Hanseatic HG5544F63602EW User Manual

Page EN-26

Installation, connection and initial commissioning

Installation, connection and initial commissioning

Choosing a suitable location

CAUTION!
Risk of injury!
The appliance is heavy and bulky.
Improper handling of the appliance
may lead to injuries.
Seek the help of another person during
■
transport, installation and assembly.
If a trolley is used to move the appli-
■
ance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
■
the packaging.
Remove all obstacles on the transport
■
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin or the floor
drain.

Positioning

You can position the dishwasher on a work-
top or in a row of kitchen units.
The location must
– be suitable for a total weight of 21.5 kg.
– be of the following size:
Height min. 438 mm
Width min. 550 mm
Depth min. 500 mm
Having the outlet hose
connected
NOTICE
Malfunction!
Failing to connect the appliance cor-
rectly may cause malfunctions during
operation.
Make sure that the waste water can
■
drain freely at any time. To that end,
the outlet pipe must have a minimum
diameter of 40 mm.
Ensure that there are no kinks or dam-
■
age to the outlet hose.
Make sure that the end of the hose is
■
not submerged in the pumped water.
Do not extend the outlet hose or re-
■
place with another drainage pipe.
You can connect the end of the outlet hose in
two different ways:
– Connection to a floor drain.
– Direct connection to the odour seal (siphon)
of your washing/dishwashing basin.
Technical measures are required for this.
For this reason, only plumbing experts or
members of our service team may connect
the outlet hose (see page EN-33).
The outlet hose must be a maximum of
1000 mm above the floor.