Installation Instructions - Profile Design WING/20c Instructions Manual

INSTALLATION INSTRUCTIONS

ATTACHING THE STEM
1. Prior to attaching the stem apply a thin coating of assembly compound to the inside faces of the
handlebar clamp on both the faceplate and stem body.
2. Clasp the two halves of the handlebar clamp around the handlebar then use the appropriate
wrench to install the bolts in the stem.
3. Ensure that the faceplate is an equal distance from the stem body at each bolt location then
tighten according to the stem torque specification.
WARNING:
Overtightening either handlebar clamp may lead to cracking and possible
failure of the handlebar.
Basebar
10