Profile Design WING/20c Instructions Manual page 3

Basebar
Your Basebar kit should contain:
• One (1) basebar (aluminium or Carbon)
• Cable hole plugs (carbon bars only)
Components compatible with this Basebar
• Profile Design Sonic Bracket or Sonic Complete Aerobar
• Profile Design Supersonic Bracket or Supersonic Complete Aerobar
• Profile Design Subsonic Bracket or Subsonic Complete Aerobar
• Profile Design Neosonic Bracket or Supersonic Complete Aerobar
• Profile Design Hypersonic Bracket or Subsonic Complete Aerobar
• Other Profile Design clip on aerobars with a 31.8mm basebar clamp
• Profile Design Aerobar Bracket Riser Kit (15mm - 70mm options)
• Profile Design 38.1mm Stems
• Profile Design ABS brake levers or 3/One Series
• Profile Design Bar tape
If anything is missing from the Basebar kit please contact your dealer.
Periodically check the Basebar for damage, particularly for scratches through the anodised or painted coating that could lead to degradation and
weakening of the base material. Replace your Aerobar if you notice any damage from use or accident.
2