Rider's Seat Installation - Triumph Speed Triple 1200 RS Owner's Handbook Manual

• Remove the
fasteners at the rear of the seat.
B01238
1. Rider's seat fixings
• Lift the seat up from the back
and slide rearwards for complete
removal from the motorcycle.
B01239
1. Tongue (rider's seat)
2. Fuel tank bracket
two rider's seat
1
2
1
2
General Information

Rider's Seat Installation

Warning
Never ride the motorcycle with the
seat fasteners loose or removed, as
both seats will not be secure and may
move.
The rider's and passenger seats are
only correctly retained and supported
once the seat fasteners are correctly
tightened.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
To install the rider's seat:
• Engage the seat's tongue under the
fuel tank bracket.
B01239
1. Tongue (rider's seat)
2. Fuel tank bracket
• Lower the rear of the seat until it
aligns with the holes on the rear
subframe.
1
2
79