Fuel Gauge; Coolant Temperature Gage - Triumph Speed Triple 1200 RS Owner's Handbook Manual

General Information

Fuel Gauge

The fuel gage indicates the amount of
fuel in the tank from E (empty tank) to
F (full tank).
12:34
AM
4
3
2
1
0
E
1. Fuel gage
With the ignition switched on, the fuel
remaining in the fuel tank is indicated
by the amount of gage segments that
are shown full.
When the fuel tank is full, all gage
segments are shown full. When the
fuel tank is empty, all gage segments
are shown empty. Other gage markings
indicate intermediate
between full and empty.
After refueling, the fuel gage and range
to empty information will be updated
only while riding
Depending on the riding style, updating
could take up to five minutes. For
more information on the fuel status
information, see page 57.
36
5
6
0
7
8
MPH
N
9
10
RPM X 1000
F
1
fuel levels
the motorcycle.

Coolant Temperature Gage

The coolant temperature gage indicates
the temperature of the engine coolant.
12:34
AM
c
15
o
3
2
1
E
1. Coolant temperature gage
When the engine is started from cold,
the coolant
show empty gage segments. As the
temperature
segments will be shown full. When
the engine is started from hot, the
coolant temperature gage will show the
relevant number of full gage segments,
dependent on engine temperature.
The normal
between the Low and High on the
coolant temperature gage.
With the
engine coolant temperature becomes
dangerously high, the high coolant
temperature warning light will illuminate
in the warning light location and a
warning message will be shown.
5
4 6
0
7
8
MPH
N
9
10
0
RPM X 1000
F
temperature
increases more
temperature
engine running,
c
15
o
High
Low
COOLANT
1
gage will
gage
range is
if the