Battery Installation - Triumph Speed Triple 1200 RS Owner's Handbook Manual

Never attempt to open, disassemble, or
pierce a lithium-ion battery.
Never strike, throw, or subject the
battery to severe physical shock.
These actions may cause a lithium-
ion battery to vent gas at a very high
temperature.
A lithium-ion
high temperature
has exhausted all of the internal
components,
damage to the motorcycle and or
serious personal injury or death.

Battery Installation

Make sure the motorcycle is stabilized
and adequately supported.
A correctly supported motorcycle will
help prevent it from falling.
An unstable motorcycle
causing injury to the operator or
damage to the motorcycle.
Warning
battery will
gas until
causing irreparable
Warning
may
Make sure the battery busbar, positive
and negative terminals do not come
into contact with each other.
Do not reverse the positive (+) or
negative (-) terminals.
Shorting the positive and negative
terminals, may cause the battery to
vent gas at a very high temperature.
vent
it Venting high temperature gas will
cause
motorcycle and or serious personal
injury or death.
To install the battery:
• Install the battery into the battery
case.
• Reinstall the battery strap.
fall,
B01221_3
1. Battery strap
2. Hook
• Reconnect
(red) lead. Tighten the terminal to
39.8 lbf in (4.5 Nm).
Maintenance
Warning
irreparable damage
the battery,
to the
1
2
positive
147