To remove the battery:
•
Remove the seat, see page 78.
•
Turn the ignition to the OFF position
and wait at least 2 minutes for the
engine ECM to complete its power
down sequence.
•
Disconnect
battery lead.
B01220
1.
Negative (black) battery lead
2.
Fastener
The battery busbar is an extension of
the battery positive terminal.
Allowing the busbar to come into
contact with the battery negative
terminal or any part of the motorcycle
will short circuit the battery.
the
negative
(black)
1
Caution
A battery short circuit will cause
irreparable damage to the battery and
or motorcycle.
•
Release
busbar cover cap clip and open the
cap.
2
B01221
1.
Battery positive lead busbar cover cap
2.
Battery positive lead cover clip
•
Disconnect the positive (red) battery
lead and position away from the
terminal.
B01222_1
1.
Battery positive (red) terminal
2.
Battery positive (red) lead busbar cover
•
Close the battery positive (red) lead
busbar cover cap.
Maintenance
Caution
Continued
the
positive
(red)
2
lead
1
2
1
143