Brake Wear Inspection - Triumph Speed Triple 1200 RS Owner's Handbook Manual

Maintenance

Brake Wear Inspection

If mounting new proprietary brand
brake pads, check that the carrier
plate of the brake pad is at least
0.18 in (4.5 mm) thick.
Mounting brake pads with the carrier
plate less than 0.18 in (4.5 mm) thick
may result in brake failure due to the
possible loss of the brake pad as it
wears.
Brake pads must
in accordance
maintenance requirements and replaced
if worn to, or beyond the minimum
service thickness.
If the lining thickness of any pad is less
than, 0.04 in (1.0 mm) (front) or 0.06 in
(1.5 mm) (rear), replace all the pads on
the wheel.
124
Warning
be inspected
with scheduled
Brake pads for this model supplied by
Triumph will have the carrier plate at
least 0.18 in (4.5 mm) thick. Always have
replacement brake pads supplied and
installed by your Triumph dealer.
1
1. Brake caliper
2. Brake pads
4.5 mm
1
1. Carrier plate
2. Brake pad
2
2