Table of Contents
Advertisement
TECHNICAL DATA
The unit is designed for application with the ambient temperature ranging from +1 °C to +40 °C and relative humidity up to 80 %.
In order to prevent condensation on the internal walls of the unit, it is necessary that the surface temperature of the casing is 2-3 °C above
the dew point temperature of the transported air.
The unit is rated as a Class I electrical appliance.
Hazardous parts access and water ingress protection rating:
•
IP22 for the unit connected to the air ducts
•
IP44 for the unit motors
The unit design is constantly being improved, thus some models may be slightly different from those described in this manual.
Supply voltage, 50 (60) Hz [V]
Maximum fan power [W]
Number of water heater rows
Maximum unit current [A]
Maximum air flow [m
/h]
3
RPM [min
]
-1
Sound pressure level at 3 m distance [dBA]
Transported air temperature [°С]
Casing material
Insulation, mineral wool [mm]
Filtering class of the extract filter
Filtering class of the supply filter
Connected air duct diameter [mm]
Weight [kg]
Heat recovery efficiency [%]
Heat exchanger type
Heat exchanger material
SEC class
*The VUE units are equipped with an enthalpy heat exchanger and do not require condensate drainage.
ø d
6
MODEL
L
L1
TECHNICAL DATA
VUT/VUE 550 PBW EC
3100
78...90/69...87
VUT/VUE 550 PBW EC
VUT/VUE 900 PBW EC
1~ 230
297
2
2,4
620
30
-25...+40
Aluzinc
20
G4
G4 (optionally – F7)
200
68
Counter-flow
Polystyrene/Enthalpy
A
www.ventilation-system.com
VUT/VUE 550/900 PBW EC
442
4
3
1030
2720
33
250
112
75...88/69...85
A
Advertisement
Table of Contents
