Table of Contents
Advertisement
The unit is designed for indoor application with the ambient temperature ranging from +1 °C up to +40 °C and relative humidity up to 80 %.
In order to prevent condensation on the internal walls of the units, it is necessary that the surface temperature of the casing is 2-3 °C higher
than the dew point temperature of the transported air.
The unit is rated as a Class I electrical appliance.
Hazardous parts access and water ingress protection rating:
•
IP22 for the unit connected to the air ducts
•
IP44 for the unit motors
The unit design is constantly being improved, thus some models may be slightly different from those described in this manual.
Parameter
Unit supply voltage, 50 Hz [V]
Maximum unit power [W]
Maximum unit current [A]
Maximum flow rate [m
/h]
3
RPM [min
]
-1
Sound pressure level at 3 m distance [dBA]
Transported air temperature [°С]
Casing material
Insulation
Extract filter
Supply filters
Connected air duct diameter [mm]
Heat recovery efficiency [%]
Humidity recovery efficiency [%]
Heat exchanger type
Heat exchanger material
Weight [kg]
SEC class
www.ventilation-system.com
VUE 150 P3
125
0.6
230
2235
49
Foamed rubber, 5 and 10 mm
G4 and F8 (PM2.5 93 %)
100
72–87
27–47
26
D
TECHNICAL DATA
VUE 250 P3
1~ 230
250
1.1
370
2400
52
-25...+40
Painted steel
G4
G4 and F8 (PM2.5 83 %)
150
66–76
22–32
Cross-flow
Enthalpy
29
E
VUE 350 P3
310
1.4
400
2150
57
G4 and F8 (PM2.5 87 %)
150
71–87
23–40
42
E
5
Advertisement
Table of Contents
