Table of Contents
Advertisement
JP6
S5U13742P00C100 Evaluation Board
Rev. 1.1
JP6 - SIOVDD Source
JP6 is used to select the source for the PIOVDD supply voltage.
When the jumper is at position 1-2, the PIOVDD voltage must be provided to the H4
connector, pin 8.
When the jumper is at position 2-3, the PIOVDD voltage is provided by the 3.3V power
supply of the board.
Figure 3-4: Configuration Jumper Location (JP6)
Seiko Epson Corporation
Installation and Configuration
11
Advertisement
Table of Contents
