Table of Contents
Advertisement
Installation and Configuration
JP4 - IOVDD Source
JP4 is used to select the source for the IOVDD supply voltage.
When the jumper is at position 1-2, the IOVDD voltage must be provided to the H1
connector, pin 32.
When the jumper is at position 2-3, the IOVDD voltage is provided by the 3.3V power
supply of the board.
JP4
Figure 3-3: Configuration Jumper Location (JP4)
10
Seiko Epson Corporation
S5U13742P00C100 Evaluation Board
Rev. 1.1
Advertisement
Table of Contents
