1.3.3
Removing SIMMs
Follow these steps to remove SIMMs:
1.
Press the holding clips on both sides of the SIMM outward to
release it.
2.
Push the SIMM downward to a 45
3.
Pull the SIMM out of the socket.
1.3.4
Reconfiguring the System
Reconfigure the system after installing or removing SIMMs.
Follow these steps to reconfigure the system:
1.
Reboot the system.
indicating that the total memory does not match the value stored
in CMOS.
2.
Press
-
-
wrong memory configuration appears.
3.
Press
twice to exit Setup and reboot the system.
system boots with the new memory configuration.
System Board
o
angle.
A memory error message appears,
to run Setup. A message indicating a
The
1-9