Ceiling Mounting; In-Ceiling Mounting - HIKVISION DE1A Series Quick Start Manual

2.7.1 Ceiling Mounting

Ceiling mounting for DE4AxxxI series (IR) PTZ camera is similar to
ceiling mounting for DE2xxx series & DE2xxxI series (IR) PTZ camera.
Refer to section 2.4.2 Ceiling Mounting for details.
Note:
After DE4AxxxI series (IR) PTZ camera is installed, tighten the fixing
screw with a screwdriver as shown in Figure 2-59.

2.7.2 In-ceiling Mounting

Notes:

Reserve at least 250 mm of height for in-ceiling mounting.

The thickness of the ceiling shall range from 5 mm to 40 mm.

Make sure the ceiling is strong enough to withstand more than
four times the weight of the PTZ camera and its accessories
Steps:
1. Rotate the base plate counterclockwise to separate it from the PTZ
camera, as shown in Figure 2-60.
Network PTZ Camera·Quick Start Guide
Tighten the Fixing Screw
Figure 2-59
41