Base Mounting - HIKVISION DE1A Series Quick Start Manual

3. Fix the camera on the wall by knocking the expansion screws into
the wall through the bracket, as shown in Figure 2-57.
Figure 2-57
Notes:

To install the PTZ bullet camera with the pole, you can use
hexagon socket screws instead of the expansion screws.

Water-proof treatment is required for cable connectors. Refer
to section 2.9 and 2.10 for details.

2.6.3 Base Mounting

Before you start:
Base-mounted PTZ bullet camera can be installed on hard plane
structures such as cement surface.
Note:
Make sure that the plane structure is strong enough to withstand
more than eight times the weight of the PTZ camera and its
accessories.
Steps:
Network PTZ Camera·Quick Start Guide
Install the Wall-mounted PTZ Bullet Camera
39