Installing De1Axxx(I) Series Ptz Camera; Ceiling Mounting - HIKVISION DE1A Series Quick Start Manual

2.2 Installing DE1Axxx(I) Series PTZ Camera

2.2.1 Ceiling Mounting

Notes:

The thickness of the ceiling shall range from 5 mm to 40 mm.

Make sure the ceiling is strong enough to withstand more than
four times the weight of the PTZ camera and its accessories.
Steps:
1. Rotate the installation plate anticlockwise, and remove the
installation plate, as shown in Figure 2-18.
2. Drill four screw holes in the ceiling according to the installation
plate.
3. Align the installation plate with the screw holes, and fix the
installation plate on the ceiling.
Network PTZ Camera·Quick Start Guide
Figure 2-18
Remove the Installation Plate
14