Alarm Output - HIKVISION DE1A Series Quick Start Manual

Power Cord
Video Cable
RS-485
Alarm Cable
Audio Cable
Network Cable

Power Cord: Supports 12 VDC power supply.

Video Cable: Connect BNC Cable to test the video output.

Alarm Cable: Connect terminal ALARM-IN with GND interface,
and connect terminal ALARM-OUT with ALARM-COM interface.

Audio Cable: Connect terminal AUDIO-IN with GND interface.

Network Cable: Connect the network interface with network
cable.

1.3 Alarm Output

Alarm output is shown in Figure 1-2.
Network PTZ Camera·Quick Start Guide
DC12V IN
. . .
Cables of PTZ Camera
Figure 1-1
2