Table of Contents
Advertisement
OPEN
Base Plate on the Bottom of the Dome
Figure 2-43
2. Attach the drill template (supplied) to the place where you want
to fix the PTZ camera, and make sure the front arrow appoints to
the monitoring area.
3. Insert two PM4
2-44.
4. Attach the junction box to the ceiling and secure it by aligning the
holes with two screws and rotating the junction box according to
the direction as shown in Figure 2-45. Make sure the front arrows
Network PTZ Camera·Quick Start Guide
For DE2xxxI Series (IR) PTZ Camera
×
10 screws into the ceiling, as shown in Figure
Attach the Drill Template
Figure 2-44
Front View of Base Plate
29
Advertisement
Table of Contents
