HIKVISION DE1A Series Quick Start Manual page 45

3. Insert the expansion screws into the ceiling. (Optional)
4. Insert four PM4
as shown in Figure 2-48. Make sure the FRONT arrow of the base
plate is of the same direction as the arrow of the drill template.
5. Connect the cables and route the cable through the cable outlet.
Align the PTZ camera with the base plate. Rotate the PTZ camera
Network PTZ Camera·Quick Start Guide
Attach the Drill Template
Figure 2-47
×
10 screws into the ceiling and fix the base plate,
Figure 2-48
Fix the Base Plate
32