Table of Contents
Advertisement
Figure 2-31
Secure the mounting base to the wall with four PA4
5.
(supplied).
Install the PTZ camera to the bracket.
6.
1). Route the cables of the PTZ camera through the wall bracket.
2). Connect the corresponding cables.
3). Hang the bracket together with the PTZ camera on the
mounting base.
4). Fix the mounting base with a PM4
Network PTZ Camera·Quick Start Guide
Secure DE2xxxI Series (IR) PTZ Camera
Install the Mounting Base
Figure 2-32
×
10 screw.
22
×
25 screws
Advertisement
Table of Contents
