HIKVISION DE1A Series Quick Start Manual page 55

Rotate Counterclockwise
Figure 2-60
2. Attach the drill template (supplied) to the place where you want
to fix the PTZ camera, and drill a hole in the ceiling according to
the template.
3. Align the cable holes of the base plate to the cable holes of the
in-ceiling bracket and then fix the base plate onto the bracket with
the four screws in the package (supplied), as shown in Figure 2-62.
Network PTZ Camera·Quick Start Guide
Separate the Base Plate from the PTZ camera
Figure 2-61
Separate the Base Plate from the
PTZ Camera
Drill Template
42