Assembling The Main Cabinet To The Cabinet Base; Installing The Cooking Components - Pit Boss BLUE BLAZING 3 Series Assembly And Operation Manual

9. ASSEMBLING THE MAIN CABINET TO THE CABINET BASE

Parts Required:
6 x #10–24x½" Screw (#C)
Installation:
• Prepare the Main Cabinet to be mounted to the Cabinet Base. Position
the Cabinet Base next to the Main Cabinet, with both facing the same
direction. Carefully, lift the Main Cabinet onto the Cabinet Base. Secure
the Main Cabinet to the Cabinet Base using six screws.

10. INSTALLING THE COOKING COMPONENTS

Parts Required:
8 x Cooking Grid Support Brackets (#2)
Cooking Grids (#1)
4 x
Water Pan (#12)
1 x
1 x Water Pan Support (#13)
Installation:
• Insert the Water Pan Support into the bottom of the main interior
cabinet, then sit the Water Pan in the support. Note 10A.
NOTE: Keep water in the Water Pan at all times while cooking. It will
catch grease and drippings from your cooks and allow for easier
clean up. If smoking for an extended period, move Water Pan up
higher to allow water to last longer.
• Next, insert eight Cooking Grid Support Brackets into the holes along
the inside left wall of the Main Cabinet. Once positioned in the holes,
tilt downward to secure into position. Repeat the same process,
matching the same heights, for the right-side wall. Note 10B.
• Lastly, place the Cooking Grids on the Cooking Grid Support Brackets
inside the Main Cabinet. Note 10C.
CAUTION: To change the height between each Cooking Grid, adjust
only when the smoker is completely cooled to avoid injury.
10
Fig.10
Fig.10
9
10
10B
10A
9
10C