Haier HP200S1 Operation And Installation Manual
Heat pump water heater
Hide thumbs
Also See for HP200S1:
- Installation and service manual (41 pages) ,
- Operation and installation manual (96 pages)
Related Manuals for Haier HP200S1
Summary of Contents for Haier HP200S1
- Page 1 Heat pump Water Heater Operation and Installation Manual ELECTRICITE Model HP200S1 HP300S1 Please read this manual carefully prior to your use of this water heater. The appearance of the water heater given in this manual is for reference only.
- Page 2 Operation and functions Display AUTO BOOST ECO+ HP HC HP H START STOP ERROR Description of the pictograms Symbol Description Power ON/OFF switch When turned off, the display shows the time and the actual water temperature. When turned on, the display shows the working mode.
- Page 3 Description of the pictograms Symbol Description Auto mode -Optimised management of the heat pump and the electrics for guaranteed comfort； - Prior using heat pump; - If compressor works more than the default 8 hours , start auxiliary power； - The compressor maximum continuous working time( can be adjust in the installer settings.
- Page 4 Description of the pictograms Symbol Description Boost mode. Heat pump and Auxiliary electrical heater are activated at the same time. Heat pump working icon． Auxiliary electrical heater working icon． Time of peak/off-peak hours. In Time of peak/off-peak hours mode, the symbol corresponding to the mode is displayed. Alarm display icon．...
-
Page 5: Operating Functions
Operating functions Installer settings - To open the installer settings, press switch off the system, then press at the same time for 10 seconds. - When menu is open, press to change the value of the settings. - Press to confirm the settings. - Press to close the menu. -
Page 6: Checking And Maintenance
Checking and maintenance - Installation and maintenance of the appliance must be done by a qualified professional . - Before working on the appliance,Shut down the machine and cut off the power supply . - Do not touch with wet hands. - Maintenance operations are important to guarantee optimum performance and extend the life of the equipment. - Page 7 Faults and protection Digital Action Release Fault type indication Operating temperature protection Air exhaust temperature protection Compressor protection After fault is solved, Evaporation high temperature switch on power protection supply for release Compressor over-current Over-current protection protection The system will automatically cut off Electricity leakage alarming power supply if any line fault occurs Over temperature alarming The actual water temperature≥85℃...