Advertisement
b. Unlock the CN801, CN802 and CN803 as shown in Fig. 4-3 and disconnect all the
flexible cables (CN801 for DC-DC converter, CN802 for REC mounted board ass'y,
CN803 for mech con mounted board ass'y)
c. Remove the four screws (M1.4x2 Toothed Lock/light gold) securing the MAM Mounted
Board to the frame. (Refer to Fig. 4-3)
Note: When installing, secure it with torque force of 9.8N·cm (1kgf·cm).
4-5 DC-DC CONVERTER REPLACEMENT
a. Remove the two screws (M1.4x2 Toothed Lock/silver) securing the DC-DC Converter to
the Battery Case Ass'y. (Refer to Fig. 4-5)
b. Desolder the power line connected the Battery Case Ass'y on the DC-DC Converter. They
can be separated from each other. (Refer to Fig. 4-5)
Advertisement
