Optional Menu - Epson TM-m30 Technical Reference Manual

Advanced Settings
You can check and set the port type and power-saving settings.
• Ethernet Port Type setting (Auto / MDI / MDI-X)
• Energy Efficient Ethernet setting (Disable / Enable)
• Standby setting (Disable / Enable)

Optional Menu

In the Optional Menu, you can check and set the following items.
Administrator Information
You can set the administrator information. You can set up to 255 ASCII characters.
• Administrator name setting
This is different from the user name used in password authentication. (The user name is fixed to "epson".)
• Installation location setting
Reset
This resets the printer or returns the network settings to default settings.
Execute the reset when you want to immediately enable settings you changed with EpsonNet Config (Web
version). However, if you executed [Reset] after executing [Send] on each setting page, this reset is not required.
This returns the printer's network settings to default settings. This may cause the printer to become unable to
communicate with the web browser.
Password
This sets the password for EpsonNet Config (Web version). You can set up to 20 ASCII characters
(alphanumeric symbols).
78
Advanced Settings are supported only on firmware version 1.23 and later.
If a wireless LAN unit is connected, the wireless LAN unit is also reset or returned to default settings.
• The user name cannot be changed. It is fixed to "epson".
• You can use the password set for the EpsonNet Config (Web Version) function as the password
for when using EpsonNet Config to perform settings.