Bluetooth Interface - Epson TM-m30 Technical Reference Manual

Bluetooth Interface

Countries and regions where Bluetooth can be used are limited. Since notes are provided for each
country, check the sheet supplied with the product.
Specification
•
3.0 (EDR supported)
•
Power Class 2
• Built-in antenna
• Pass key setting is possible
• Device name setting is possible
• Pairing information of up to 8 devices can be registered
Initial Settings
Setting Contents
Bluetooth communication
settings
Auto Reconnect Feature
The auto reconnect feature allows the printer to automatically restore a connection in the following situations if
the connection to the iOS device is lost.
• When the printer is turned on
• When the signal is dropped and then restored
The following shows the printer operations and connection methods when the auto reconnect feature is enabled
or disabled.
114
Setting Items
Bluetooth passkey
Bluetooth device name
Bundle Seed ID
Enable/Disable auto reconnect to
iOS device
Bluetooth Security
Bluetooth communication interval
during power saving mode
Initial Settings
"0000"
"TM-m30_xxxxxx"
(Where xxxxxx is the last six digits in the serial
number)
"TXAEAV5RN4"
"1" (Enable)
Low
Level 1 (Standard)